Metallic floors are built in layers
A metallic epoxy floor gets its depth from pigment moving inside a resin layer, but that look sits on top of careful preparation and priming. The featured Leggari videos show the full sequence, from crack repair to topcoat.
Cracks get filled first
In the start-to-finish video, the installer fills a crack with a stiff patch paste before any coating. He notes it bonds well to concrete and that the epoxy bonds well to it, and that you only mix a little at a time because it sets up quickly.
Primer choice depends on the surface
That shop floor was not ground; the crew used a primer made for surfaces they could not mechanically prep, then a pigmented primer to lighten the floor under the metallic colors. For most garages and homes, mechanical prep still comes first. In “A Contractor Tells All,” the crew shot-blasts the floor and applies a thin epoxy seal coat to reduce outgassing bubbles.
Why the base color matters
For a silver-and-white metallic, the crew rolls a light gray base so the final colors read correctly. The Contractor Tells All installer notes that for a white floor you would probably want to prime. Ask to see how your chosen colors look over the base planned for your floor.
Pouring and spreading
The base coat is poured in ribbons, spread with a squeegee or notched squeegee, then rolled and cross-rolled. In the contractor video, the crew marks the walls so each three-gallon kit covers a planned section and pours a bead around the perimeter before filling in.
Highlights create the movement
Highlights are added once the base is down. In one project the crew uses about 12 ounces of highlight per three-gallon kit. How the highlights are placed and moved is what creates the swirls and veining people associate with metallic floors.
Every metallic floor is unique
Because the pigment moves in the resin, no two metallic floors look exactly alike, and small samples will not match the whole room perfectly. Expect variation as part of the look rather than a defect.
Topcoat and sheen
The featured shop floor finishes with a matte topcoat; others choose gloss. Ask what topcoat is planned, whether it is UV stable, and how it affects slip resistance in your space.
The Austin takeaway
A metallic epoxy floor is as much about prep, base color, and planning as it is about artistry. Ask your installer to walk you through each layer and show color samples over the planned base. Austin Epoxy Flooring Pro installs metallic epoxy and offers free estimates.
Call 512-325-5434 (open 24 hours, 7 days a week) or request a free estimate.
Sources
Learn To Install Metallic Epoxy Floors Like The Pros | Start To Finish — Leggari Products (YouTube, 1,906,312 views as reported 2026-10-14)
A CONTRACTOR TELLS ALL! - EPOXY FLOORS FOR BEGINNERS — Leggari Products (YouTube, 1,554,858 views as reported 2026-10-14)