Epoxy Flooring in Round Rock: How to Choose a Contractor for Your Garage

Start by comparing systems, not prices

Two Round Rock quotes can look similar on paper and describe very different floors. The details that matter are how the concrete is prepared, how thick the materials are, how many chips are used, and what topcoat goes on top. A clear proposal spells those out.

Professional vs DIY materials

In his pro-vs-DIY video, Tim Seay explains that many big-box water-based kits are about 50 percent solids, while his crew uses a 100 percent solids epoxy primer. He applies it at roughly 150 square feet per gallon and estimates the cured DIY film would be about 25 percent as thick. Ask any contractor for solids content and spread rate.

Prep should be mechanical

Tim Seay’s crew grinds the floor before coating, even improvising with weights and sand to strip a sealed slab. The Leggari crew in “A Contractor Tells All” shot-blasts the floor until it is porous, then applies a thin epoxy seal coat to reduce outgassing bubbles and lock into the pores. A contractor who skips mechanical prep is skipping the step that drives adhesion.

Ask how many chips go down

Tim Seay describes broadcasting “to rejection,” about 250 to 300 pounds of chips on a roughly 1,200-square-foot garage, versus about 10 pounds in a DIY kit. A full broadcast adds texture and hides imperfections. A partial broadcast is a different look and a different product.

Ask about the topcoat

His crew applies a polyaspartic urethane topcoat at about 130 square feet per gallon. He estimates that cured film is about eight times thicker than a typical DIY clear coat. Ask what the topcoat is, whether it is UV stable, and at what rate it is applied.

Watch for organized crews

In the Leggari video, the lead installer marks the walls so each three-gallon kit covers a planned area, assigns one person to mix constantly, and caulks the gap where the slab meets the stem wall. That kind of planning shows up in a consistent finish.

Red flags when comparing quotes

Be cautious if a quote does not mention prep method, moisture testing, material type, or cure times, or if it relies on claims like “stronger than epoxy” without explaining the system. Marketing language is not a specification.

Questions to ask a Round Rock contractor

Ask: How will you prepare my slab? Will you test for moisture? What is the solids content of the primer? How many pounds of chips? What topcoat, and at what spread rate? When can I drive on it? Can I see photos of floors you installed yourself?

The Round Rock takeaway

Choosing an epoxy contractor in Round Rock comes down to transparency. A good contractor explains prep, materials, and schedule in plain language and puts it in writing. Austin Epoxy Flooring Pro serves Round Rock and offers free on-site estimates.

Sources

PRO vs. DIY Epoxy Garage Floor Kits :: Whats the difference? — Tim Seay (@TimDCVA) (YouTube, 940,155 views as reported 2026-10-14)
A CONTRACTOR TELLS ALL! - EPOXY FLOORS FOR BEGINNERS — Leggari Products (YouTube, 1,554,858 views as reported 2026-10-14)