Home / Locations
Round Rock Epoxy Flooring Guide: Slabs, Finishes and Costs
A Round Rock, TX epoxy flooring guide: how Blackland Prairie clay and the I-35 divide affect garage floors, which systems suit them, published prices and what to ask installers. Open 24 hours, 7 days.
This Round Rock epoxy flooring guide explains how local soils, climate and housing affect garage and commercial floor coatings in Round Rock, Texas, which systems suit them, what they typically cost and how to compare installers. It's written by Austin Epoxy Flooring Pro. We're based in Austin at 2025 Guadalupe Street, and our regular service area is Austin and Georgetown, which sit on either side of Round Rock. We don't have a Round Rock office. If you're in Round Rock, call or text (512) 325-5434. We're open 24 hours, 7 days a week and will tell you honestly whether we can take on your project. Either way, this page should help you plan.
About Round Rock
Round Rock sits in Williamson County just north of Austin, straddling I-35. It takes its name from a large rock in Brushy Creek that marked a low-water crossing for wagons and cattle drives. The small town grew enormously after Dell Technologies moved its headquarters here in the 1990s, and today it's a major suburb with large residential areas, sports facilities such as the Dell Diamond ballpark, and extensive retail along the interstate.
Round Rock also sits on a geological boundary. The Balcones Fault zone runs roughly along I-35 here. West of it, the ground is Hill Country limestone. East of it, the land opens into the deep clay soils of the Blackland Prairie. For floors, which side of the interstate you live on matters.
Published Prices
| Service | Published range |
|---|---|
| 1-car garage | $800 – $1,200 |
| 2-car garage | $1,400 – $2,200 |
| 3-car garage | $2,000 – $3,200 |
| Polyaspartic (same-day) | $3 – $7 per sq ft |
| Metallic epoxy | $6 – $12 per sq ft |
| Commercial epoxy | $2 – $5 per sq ft |
These are our homepage ranges. Any installer's firm price should follow a site visit and a written scope.
East vs West: Why It Matters for Your Floor
East of I-35: Blackland clay
Blackland Prairie clay is famously expansive. It swells when wet and shrinks and cracks when dry, sometimes opening visible fissures in yards during drought. Slabs built on it move with those cycles. In east Round Rock garages, expect:
- More cracks, and wider ones.
- Cracks that reopen after repair as seasons change.
- Slight height differences across cracks.
- Joints that open over time.
A coating can bridge hairline cracks but can't stop the ground moving. Wider cracks need routing and filling with a suitable repair material, and any installer should explain what may reappear.
West of I-35: limestone
West Round Rock sits closer to the Hill Country, with limestone nearer the surface. Slabs here generally move less from soil swelling, though settlement over fill can still cause cracking. Preparation is usually more predictable.
Everywhere: moisture
Irrigation, heavy rain and slabs without a good vapor barrier can push moisture up through concrete. White residue or damp patches are a signal to test before coating.
Typical Round Rock Homes
1980s–1990s neighborhoods
Many central and older neighborhoods were built during the first growth waves. Two-car garages with decades of oil stains, tire marks, paint or sealer, and settlement cracks are typical. Preparation is the main cost.
2000s–2010s subdivisions
Large subdivisions on all sides of the city have two- and three-car garages, often with builder sealer and smooth, hard-troweled slabs. The sealer must be ground off and the surface opened before coating.
New construction
Newer homes on the east side combine young slabs with clay soils. The concrete may be sound now but will see seasonal movement, so crack repair and expectations both matter.
Neighborhood Notes
Round Rock's neighborhoods span every era of its growth. Areas near the old downtown and Brushy Creek include some of the oldest homes, with detached garages and older slabs. Neighborhoods built in the Dell-era boom of the 1990s and 2000s fill much of the city, typically with attached two-car garages and decades of wear. Newer master-planned communities on the north and east sides have three-car garages and young slabs on clay. Each group tends to need different preparation, so mention your neighborhood and the age of your home when you ask for an estimate.
A Note on Brushy Creek
The creek that gave the city its name runs east through Round Rock, and homes near it and its tributaries may have higher groundwater and more humid garages. That makes moisture checks especially worthwhile before coating.
Choosing a System
Full-broadcast flake
The default for most Round Rock garages: hides dark clay tracked in on tires, hides small flaws and adds grip.
Partial flake
A cleaner, flatter look with more of the base color showing. Shows more dirt.
Quartz
Dense, sandy texture. Epoxy quartz flooring suits mudrooms, laundry rooms, patios and commercial kitchens.
Metallic epoxy
Glossy and decorative, for game rooms, offices and showrooms. Needs a well-prepared, flat slab and shows dust.
Solid color
Uniform and easy to see small parts on; a workshop favorite.
Full polyaspartic
Fast curing and color-stable, for owners who need the garage back quickly.
Polyaspartic vs Epoxy for Round Rock Garages
| Epoxy | Polyaspartic | |
|---|---|---|
| Cure | Slower | Fast |
| Sun | Can yellow | Color-stable |
| Build | Thick; bridges small flaws | Thinner per coat |
| Flexibility over moving cracks | Depends on product | Depends on product |
| Working time | Forgiving | Short |
On clay slabs, a thicker epoxy base helps bridge small irregularities, and a polyaspartic topcoat adds sun resistance. That hybrid is the most common Round Rock garage system.
Choosing a Color
- Dark clay soil tracked in on tires shows least on mid-tone and darker blends.
- Light blends brighten the garage but show tire marks.
- Gray and tan mixes are the most forgiving overall, and a popular choice for busy family garages.
- Look at real samples on your floor in your own light.
Common Floor Problems in Round Rock
Recurring cracks
On the east side especially, cracks may reappear through a coating after a dry summer. Careful repair helps; honest expectations help more.
Peeling paint and kits
Thin coatings over etched concrete often fail under hot tires. Remains must be ground off before recoating.
Builder sealer
Wears unevenly in tire paths and blocks new coatings from bonding.
Efflorescence
White powder on the slab indicates moisture movement. Test first.
Stains from lawn chemicals
Fertilizer and weed killers stored in garages can stain or etch concrete.
How Round Rock Garages Are Used
- Parking and storage: full flake with a polyaspartic topcoat.
- Youth sports gear: with so many sports facilities nearby, garages often hold muddy cleats and equipment; a textured, easy-clean finish helps.
- Workshops: solid color or partial flake plus a chemical-resistant topcoat.
- Home gyms: flake around rubber mats.
- Home offices or studios in converted garages: metallic or solid color.
Comparing Finishes Side by Side
| Finish | Texture | Hides clay mud | Slip resistance | Relative cost |
|---|---|---|---|---|
| Full flake | Light | Very well (mid/dark blends) | Good | Mid |
| Partial flake | Smooth | Moderately | Fair | Lower-mid |
| Quartz | Sandy | Well | Very good | Mid to higher |
| Metallic | Glossy | Poorly | Fair without additive | Higher |
| Solid color | Smooth | Poorly | Fair without additive | Lower |
Which System for Which Space
- Family two-car garage: full flake in a mid-tone blend with a polyaspartic topcoat.
- Sports-gear garage: full flake or quartz for grip and easy cleaning.
- Workshop: solid color or partial flake.
- Laundry or mudroom: quartz.
- Converted office or studio: metallic or solid color.
- Covered patio: quartz or flake with a UV-stable topcoat and slip-resistant additive.
- Restaurant kitchen: quartz with coved edges.
- Warehouse: a commercial system with joint treatment.
Patios and Outdoor Slabs
Round Rock's long warm season means many owners ask about coating patios. Outdoor slabs face sun, rain and, on clay, more movement than garage slabs. A UV-stable topcoat and slip resistance matter, drainage must carry water off the surface, and some outdoor slabs aren't good candidates. A careful installer will say so.
Commercial Floors in Round Rock
Round Rock's commercial areas include large retail centers along I-35, restaurants, medical offices, offices, gyms and light industrial and distribution space.
- Restaurants: quartz with coved edges and drain detailing.
- Retail and showrooms: decorative finishes, installed outside opening hours.
- Medical and dental: easy-clean, low-odor systems.
- Warehouses and distribution: joint treatment, forklift traffic and phased work.
- Electronics, labs and server rooms: static-control flooring where required.
How Cracks Are Repaired on Clay Slabs
Because cracks are the defining issue for many Round Rock floors, it's worth knowing how they're usually handled.
- Assessment. Each crack is looked at for width, length, whether the two sides are level, and whether it seems to be moving.
- Hairline cracks. Very fine shrinkage cracks are often filled as part of the base coat or with a thin crack filler.
- Wider cracks. These are routed or chased with a grinder to create a clean channel, vacuumed and filled with a repair material.
- Uneven cracks. If one side is higher, the edge is ground down so the floor is flush before coating.
- Control joints. The saw-cut joints in a slab are designed to let it move. Some installers fill them, others leave them visible; ask which approach suits your floor.
- Coating. The base coat and broadcast go over the repaired areas.
Even with careful repair, a crack on actively moving clay may reappear as a fine line through the coating. That isn't necessarily a failure of the floor, but it's worth discussing ahead of time so it isn't a surprise.
Signs Your Floor Is Ready to Coat
- The slab is sound, without large loose or crumbling areas.
- Cracks are stable rather than visibly widening.
- There's no persistent dampness or standing water.
- Any old coating or sealer can be ground off.
- You can clear the garage for installation and the cure period.
Questions About the Crew
Ask who supervises on the day, how walls and doors are protected, how dust is controlled while grinding, and who your contact is during the job. Clear answers are a good sign.
Questions to Ask Any Round Rock Installer
- Will you visit and measure before giving a firm price?
- Is my property on clay or limestone, and what does that mean for cracks?
- How will you repair the cracks I can see?
- How will you remove the builder sealer?
- Which topcoat do you recommend for my garage door's orientation?
- When can I walk and park on the floor?
- What's excluded?
- Where is your office, and who do I call afterward?
What a Good Written Scope Includes
- Measured area.
- Existing condition: stains, cracks, sealer, moisture.
- Diamond grinding of floor and edges.
- Crack and spall repair by type.
- Base coat, broadcast and topcoat, each named.
- Options priced separately.
- Exclusions.
- Schedule and cure times.
- Total price.
Warning Signs
- A firm price without a visit.
- No mention of grinding or crack repair.
- Promises that cracks will never come back.
- Pressure to sign on the spot.
- Rankings or awards with no source.
Budgeting
Start from the published range. Expect the lower end with a clean bare slab and a standard blend; the upper end with sealer removal, many cracks, or extras such as stem walls, steps or an extra topcoat. Clay-soil slabs often need more crack work, which shows up in the price.
Installation Day
Most garages take one day: protection of walls and doors, diamond grinding with vacuum dust collection, crack and spall repair, base coat and broadcast, scraping and vacuuming, and the topcoat. A walkthrough at the end should cover cure times. Grinding is loud for a few hours.
Seasons
Spring and fall are easiest, with mild temperatures and moderate humidity. Summer installs start at first light. A long dry spell can widen clay-soil cracks, and heavy rain can change slab moisture, so timing may affect repairs. Winter cold fronts slow curing.
HOA Rules
Many Round Rock subdivisions have HOAs with rules on contractor hours, parking and noise. Share them with the installer before booking.
DIY or Professional?
DIY kits cost less but rely on etching, go on thin, and rarely include real crack repair or a durable topcoat. On a moving clay slab in a Texas summer, that often means peeling and cracks showing through quickly. If you go DIY, prepare thoroughly and choose a cool day.
Reading Reviews
Look for reviews that mention preparation, communication and how floors held up after a season or two. Check how companies respond to complaints. Neighbors with floors that are a few years old are the most useful reference.
After the Floor Is Done
Get storage off the floor with wall shelving or ceiling racks, add felt pads under heavy cabinets, and put a mat under the workbench. Wait for full cure before bolting heavy racks to the floor.
Care and Maintenance
- Sweep weekly, and more often after rain, when dark clay mud is tracked in on tires and shoes.
- Clean oil, fertilizer and chemical spills promptly.
- Wash with mild cleaner and water.
- Avoid harsh solvents unless the installer confirms they're safe.
- Use mats under tires in wet weather.
Why This Page Doesn't Rank Companies
Comparison pages often end with their author at the top. We'd rather help you understand your slab, choose a system and compare scopes, so you can decide for yourself.
Our Service Area, Plainly
Our regular service area is Austin and Georgetown. Round Rock sits between them, and we'll discuss projects there, but availability is confirmed one project at a time. Call or text (512) 325-5434 with your address and photos, and we'll answer quickly.
Customer Feedback
Austin Epoxy Flooring Pro has a 5.0 rating on Google. Whoever you hire, ask to see a floor that has been through a Round Rock summer or two.
Request a Free Estimate
Call or text (512) 325-5434 (open 24 hours, 7 days a week) or use the free estimate form. Send the approximate square footage, how the space is used, photos of the current concrete, and your timing.
Frequently Asked Questions
Does Austin Epoxy Flooring Pro have a Round Rock office?
No. Our office is in Austin at 2025 Guadalupe Street. Our regular service area is Austin and Georgetown, and Round Rock projects are confirmed case by case.
Why do Round Rock garage floors crack so much?
East of I-35, Blackland Prairie clay swells and shrinks with moisture, moving slabs. West of I-35, limestone moves less.
Will a coating stop cracks?
No coating can stop the ground moving. Cracks are repaired before coating, and some may reappear over time on clay soils.
What does a two-car garage cost?
Our published range is $1,400–$2,200, with the firm price set after a site visit.
Which finish hides clay mud?
Mid-tone and darker flake blends.
Is polyaspartic or epoxy better on clay slabs?
Many installers use an epoxy base to bridge small irregularities with a polyaspartic topcoat for sun resistance.
When can I call?
Any time. We are open 24 hours, 7 days a week.
Do I need to remove the builder sealer?
Yes. It must be ground off for a new coating to bond.