Home / Service Areas
Epoxy Flooring Service Areas in Austin, Georgetown and Central Texas
Service areas for Austin Epoxy Flooring Pro: projects in Austin and Georgetown, plus local planning pages for nearby Central Texas towns. Call (512) 325-5434, open 24 hours, 7 days.
Austin Epoxy Flooring Pro takes on epoxy flooring, polyaspartic, flake, quartz, metallic and commercial floor-coating projects in Austin and Georgetown, Texas, working from our staffed office at 2025 Guadalupe Street in Austin. This page also links to local planning pages for nearby Central Texas communities. Those pages explain the soil, slab and climate conditions that affect floors in each town. For projects outside Austin and Georgetown, availability, project fit and scheduling are confirmed one project at a time, so please call or text (512) 325-5434, 24 hours a day, 7 days a week, before planning around us.
Our Core Service Area: Austin and Georgetown
We keep our regular service area focused on two cities. A tight area lets us visit every floor in person before quoting, return for moisture testing when it's needed, and arrive early on hot days when the coating schedule depends on temperature.
Epoxy flooring Austin
Austin is our home base and the source of most of our projects. It is the capital of Texas and one of the country's fastest-growing large cities. Floors here range from detached garages behind early 20th-century houses to large attached garages in newer subdivisions, and from small storefronts and restaurants to warehouses and flex space along the highway corridors.
The local factors we discuss most often are expansive clay soils that move slabs and open cracks, summer heat that shortens coating working time, and moisture in older slabs that can weaken adhesion. Each is checked on site and written into the estimate when it applies.
- Epoxy flooring in Austin: garage, residential, decorative and commercial floor-coating planning.
Epoxy flooring Georgetown
Georgetown is the Williamson County seat, north of Austin along I-35. It is known for its historic courthouse square, Southwestern University and fast-growing neighborhoods, including large active-adult communities. Many homes have newer two- and three-car garages, and owners often ask for floors that are easier to clean and less slippery. Ground conditions range from limestone to clay, so slabs vary between subdivisions.
- Epoxy flooring in Georgetown: project scope and surface-preparation questions for Georgetown properties.
Nearby Communities: Local Planning Pages
The pages below are planning guides for nearby towns. Each covers local conditions and the questions worth asking before you request an estimate. If your property is in one of these towns, call to confirm whether we can take on the project before you plan around our schedule. We don't have offices in these towns; our office is in Austin.
Epoxy flooring Round Rock
Round Rock lies just north of Austin in Williamson County, straddling I-35. It grew quickly from the 1980s onward with large residential subdivisions and a strong base of technology and business employers. Many garages date from the 1990s and 2000s, so we often see years of tire marks, oil stains and settlement cracks. The eastern parts of the city sit on Blackland Prairie clay, which tends to move slabs more than the rockier ground to the west.
- Epoxy flooring in Round Rock: local garage and concrete-coating planning information.
Epoxy flooring Cedar Park
Cedar Park is northwest of Austin along US 183, at the edge of the Texas Hill Country. Much of the city sits on limestone, with thinner soils than the clay prairie to the east. Homes are mostly from the 1990s onward, and garages are commonly two or three cars. Hill Country lots with sloped driveways can mean garages that collect runoff at the door, a detail worth mentioning in any estimate request.
- Epoxy flooring in Cedar Park: planning guidance for residential and commercial concrete floors.
Epoxy flooring Leander
Leander, north of Cedar Park, has been one of the fastest-growing cities in the region, with many brand-new subdivisions and a commuter rail connection to Austin. New construction means many slabs are young, smooth and hard-troweled. Those slabs usually need careful grinding to give a coating something to grip, and very new concrete may need time to cure before it is coated.
- Epoxy flooring in Leander: local planning information for garages, homes and workspaces.
Epoxy flooring Lakeway
Lakeway sits on the south shore of Lake Travis west of Austin. Homes are often larger, with oversized garages, golf-cart bays and workshop space, and the terrain is hilly limestone. Lake humidity, boat storage and golf carts bring their own floor considerations: water tracked in, trailer tires and chemical cleaners.
- Epoxy flooring in Lakeway: concrete condition, finish and scheduling considerations.
Epoxy flooring Bee Cave
Bee Cave, west of Austin near the Hill Country Galleria, mixes upscale residential areas with retail development. Garages tend to be large, and decorative finishes such as metallic epoxy or custom flake blends are common requests. Commercial and retail space along the highway corridor brings questions about appearance and installation outside business hours.
- Epoxy flooring in Bee Cave: written-scope questions for qualifying floor-coating projects.
Epoxy flooring Buda
Buda is south of Austin along I-35 in Hays County. Once a small railroad town, it has grown into a busy suburb with newer subdivisions alongside a historic downtown. Slabs on the clay soils east of the interstate are prone to movement cracks, so crack treatment is usually a main topic in any estimate.
- Epoxy flooring in Buda: garage and residential concrete-floor planning.
Epoxy flooring Kyle
Kyle lies just south of Buda along I-35 and has grown very quickly in recent years. Much of its housing is new construction with standard two-car garages. As in Leander, new slabs are typically in good structural condition but very smooth, so grinding and the timing relative to the concrete's age matter.
- Epoxy flooring in Kyle: preparation, coating and access-planning considerations.
Epoxy flooring Hutto
Hutto is east of Round Rock in Williamson County, on the Blackland Prairie. Its deep clay soils swell and shrink more than most, which is why slab cracking and joint movement come up often. Many neighborhoods are newer, but the soil still affects how slabs behave over time.
- Epoxy flooring in Hutto: project-specific coating guidance for local properties.
Epoxy flooring Manor
Manor is northeast of Austin along US 290 in Travis County. It has seen rapid residential growth with large new subdivisions. Prairie clay soils, new slabs and a mix of garages and small commercial spaces make preparation planning and crack treatment the main subjects in estimates here.
- Epoxy flooring in Manor: planning questions for local garages and workspaces.
Epoxy flooring Taylor
Taylor is a historic farming and railroad town east of Hutto in Williamson County. It has older homes and commercial buildings downtown alongside new industrial development. Older slabs may have past coatings, patches and uneven areas, while new industrial and warehouse space brings commercial floor questions about traffic and chemical exposure.
- Epoxy flooring in Taylor: residential and commercial concrete-floor planning information.
Epoxy flooring Bastrop
Bastrop lies southeast of Austin on the Colorado River, known for its historic downtown and the nearby Lost Pines forest. Soils there are sandier than the clay prairie around Austin, and homes range from older properties near downtown to rural lots with large shops and barns. Shop floors and outbuildings are common subjects for estimate questions.
- Epoxy flooring in Bastrop: finish, preparation and written-scope guidance.
Epoxy flooring Dripping Springs
Dripping Springs is west of Austin in Hays County, often described as a gateway to the Hill Country. Larger rural and semi-rural lots, workshops, wedding venues and wineries make for a varied mix of floors. Limestone ground, long driveways and detached shops are common, and many floors see dust and grit tracked in from outside.
- Epoxy flooring in Dripping Springs: questions to consider before requesting a floor-coating estimate.
Typical Projects by Area Type
The communities on this page fall into a few broad groups, and each group tends to bring similar floor requests.
- Central city. Older homes in Austin often have detached garages, older slabs and past paint or sealers. Removing old coatings and repairing cracks are the main tasks.
- Established suburbs. Round Rock, Cedar Park and parts of Georgetown have many 1990s and 2000s homes with attached garages, years of staining and settlement cracks.
- New-growth suburbs. Leander, Kyle, Hutto and Manor have many new slabs that are structurally sound but very smooth, so grinding is the key step.
- Hill Country and lake communities. Lakeway, Bee Cave and Dripping Springs bring larger garages, workshops and decorative finishes, along with limestone ground and runoff at the garage door.
- Historic towns and rural areas. Taylor and Bastrop mix older downtown buildings with rural shops and barns, which can mean uneven, patched or very large floors.
Reaching Us From Any Area
We are open 24 hours, 7 days a week. Wherever your property is, call or text (512) 325-5434 at a time that suits you, and include your city so we can tell you quickly whether the project is a fit.
How Location Affects Your Floor
Across all these communities, three geographic factors shape floor-coating decisions.
Soil
East of the Balcones Escarpment, which runs roughly along I-35, the land is mostly deep clay prairie. Clay swells and shrinks with moisture, and slabs move with it. West of the escarpment, in the Hill Country, the ground is mostly limestone with thinner soils. Slabs there move less from soil swelling but can sit on uneven rock. Knowing which side of that line your property is on helps explain the cracks you see.
Heat and sun
Central Texas summers are long and hot. Garages heat up, coatings cure faster, and installers have less working time. Garage doors left open to the afternoon sun expose floors to ultraviolet light, which can yellow some epoxy topcoats. That's a common reason to choose a polyaspartic topcoat.
Moisture
Humidity, irrigation, heavy rains and slabs without a good vapor barrier can push moisture up through concrete. Moisture is one of the most common causes of coatings failing to bond. Where we see signs of it, the estimate includes testing and a primer suited to the conditions.
Polyaspartic vs Epoxy Across Central Texas
In every town on this page, people ask whether to choose polyaspartic or epoxy. Epoxy builds a thick, strong base and fills minor flaws, but it cures more slowly and can yellow in sunlight. Polyaspartic cures quickly and holds its color, but it has a short working time. Many garages use an epoxy base with flake and a polyaspartic topcoat. Our homepage lists polyaspartic coatings from $3–$7 per square foot, and two-car garage systems at $1,400–$2,200. Read more in our polyaspartic vs epoxy guide.
Commercial Projects
For commercial floors such as warehouses, restaurants, shops, clinics and offices, the same location factors apply, along with traffic, chemical exposure, washdown and operating hours. Quartz systems are common in wet areas, and some facilities need static-control flooring. See our commercial epoxy flooring page and ESD flooring page.
Why We Keep a Focused Service Area
Floor coating is a hands-on trade, and distance has real effects on quality. Here is why we keep our regular area to Austin and Georgetown.
- In-person estimates. We prefer to see every floor before quoting. Photos help, but cracks, old coatings and moisture are judged most reliably on site.
- Return visits for testing. Some slabs need a moisture test before the system is chosen. Being nearby makes that practical.
- Early starts. In summer, coating work starts at first light. A long drive cuts into the coolest part of the day.
- Follow-up. If you have a question after installation, we can come and look rather than guess from a description.
When a project outside our core area is a good fit, for example a larger commercial floor or a project timed alongside other nearby work, we're glad to discuss it. We'd simply rather be clear up front than overpromise.
What to Include When You're Outside Austin or Georgetown
If your property is in one of the nearby communities, a little extra information helps us answer quickly:
- The city and nearest major road or intersection.
- The type of space: garage, shop, patio, interior room or commercial floor.
- Approximate square footage, or garage size by number of cars.
- Photos of the whole floor and any cracks, stains or peeling.
- Your timing, including any fixed deadline.
- Whether the project is flexible on dates, which can make scheduling easier.
With that, we can tell you whether we can take the project on and, if so, arrange a visit.
Questions to Ask Any Installer About Their Service Area
Whoever you hire, these questions help you understand how they'll handle your project:
- Will someone visit and measure the floor before giving a firm price?
- Where is your office, and who do I call if I have a question after installation?
- Will the same crew prepare and coat the floor?
- How do you schedule work in hot weather?
- If moisture testing is needed, how and when does it happen?
Clear, specific answers are a good sign. Vague answers about coverage or follow-up are worth asking about again.
Neighborhood and Project Resources
- Austin-area neighborhood guide: planning notes for Austin, Georgetown, Round Rock and Leander neighborhoods.
- Austin epoxy services: start here for garage, metallic, polyaspartic and commercial services.
- Commercial epoxy flooring: scope, access and return-to-service planning for facilities.
Request a Local Floor-Coating Estimate
Share your property's city, approximate floor size, current concrete condition, intended use, preferred finish, timing and any access constraints. Call or text (512) 325-5434 24 hours a day, 7 days a week, or use the free estimate form. Austin Epoxy Flooring Pro has a 5.0 rating on Google.
Request a Free Estimate
Call or text (512) 325-5434 (open 24 hours, 7 days a week) or use the free estimate form. Send the approximate square footage, how the space is used, photos of the current concrete, and your timing.
Frequently Asked Questions
What areas does Austin Epoxy Flooring Pro serve?
We take on projects in Austin and Georgetown, Texas. For nearby towns, availability is confirmed project by project, so please call first.
Where is your office?
Our staffed office is at 2025 Guadalupe Street, Austin, TX 78705.
Do you have offices in Round Rock, Cedar Park or other nearby towns?
No. Our only office is in Austin. The town pages on this site are planning guides, not office locations.
Can you work on my floor if I'm outside Austin and Georgetown?
Call or text (512) 325-5434 with your city and project details, and we'll tell you honestly whether the project is a fit.
Why does soil matter for epoxy flooring?
Clay soils east of I-35 swell and shrink, moving slabs and opening cracks. Cracks need a repair plan before any coating goes down.
When can I call?
24 hours a day, 7 days a week.
Do the town pages mean you have crews based there?
No. The town pages describe local conditions to help you plan. Our crews and office are based in Austin.
Do you charge for estimates?
No. Estimates are free and come as a written scope.