Home / Locations
Georgetown Epoxy Flooring Guide: Finishes, Systems and Costs
A Georgetown, TX epoxy flooring guide: flake, quartz, metallic and polyaspartic systems for Georgetown garages, patios and businesses, with published prices. Open 24 hours, 7 days: (512) 325-5434.
This Georgetown epoxy flooring guide explains which floor coating systems suit Georgetown homes and businesses, how they look and feel, what they cost, and how local conditions affect the choice. It is written by Austin Epoxy Flooring Pro, which takes on projects across Georgetown as one of the two cities in our regular service area. Our staffed office is in Austin at 2025 Guadalupe Street. We are open 24 hours, 7 days a week at (512) 325-5434, and we have a 5.0 rating on Google. Rather than ranking companies, this page focuses on helping you choose the right floor.
Georgetown at a Glance
Georgetown is the seat of Williamson County and one of the fastest-growing cities in Central Texas. Its downtown square is known for restored 19th-century commercial buildings. Southwestern University sits just east of downtown. The San Gabriel River runs through the city, Lake Georgetown lies to the west, and Inner Space Cavern, discovered during construction of I-35, sits under the south side of town.
That cavern is a reminder of what's underground. Much of western Georgetown sits on the limestone of the Edwards Aquifer recharge and contributing zones, while eastern Georgetown sits on clay prairie. Those two kinds of ground affect how slabs behave, and therefore how floors should be prepared and coated.
Published Prices
| Service | Published range |
|---|---|
| 1-car garage | $800 – $1,200 |
| 2-car garage | $1,400 – $2,200 |
| 3-car garage | $2,000 – $3,200 |
| Polyaspartic (same-day) | $3 – $7 per sq ft |
| Metallic epoxy | $6 – $12 per sq ft |
| Commercial epoxy | $2 – $5 per sq ft |
These are our homepage ranges. A written estimate after a site visit sets your exact price.
The Main Floor Systems, Explained
Full-broadcast flake
What it is: A pigmented base coat, a full broadcast of vinyl chips until no base shows, scraping, and a clear topcoat.
Look and feel: Speckled, like terrazzo or granite, with a light texture underfoot.
Good for: Most Georgetown garages. It hides dust, small chips and tire marks, and the texture adds grip.
Considerations: The more chips, the more texture. An extra topcoat smooths it if you prefer.
Partial flake
What it is: A solid base coat with a lighter scattering of chips.
Look and feel: Mostly solid color with flecks. Flatter and smoother.
Good for: Owners who want a cleaner, more uniform look and don't mind seeing a bit more dust.
Quartz broadcast
What it is: Colored quartz granules broadcast into epoxy and sealed.
Look and feel: Dense and sandy, like fine sandpaper under a clear coat.
Good for: Mudrooms, laundry rooms, covered patios, pool-equipment rooms and commercial wet areas. Epoxy quartz flooring is a strong choice anywhere slip resistance and frequent washing matter.
Metallic epoxy
What it is: Epoxy with pearlescent pigments, worked by hand to create swirls and depth.
Look and feel: Glossy, flowing and individual. No two floors are alike.
Good for: Showpiece garages, game rooms, studios, offices and retail spaces on the square.
Considerations: Smooth and reflective, so it shows dust and preparation flaws. It can be slippery when wet without an additive.
Solid color
What it is: A base and topcoat in one color, without broadcast.
Look and feel: Clean and uniform, like a painted floor but far tougher.
Good for: Workshops where small parts must be easy to spot, display garages and utility rooms.
Full polyaspartic
What it is: A system where the coating layers are polyaspartic rather than epoxy.
Good for: Owners who need the garage back quickly, or who want maximum color stability in sun.
Polyaspartic vs Epoxy in Georgetown
| Epoxy | Polyaspartic | |
|---|---|---|
| Cure | Slower | Fast |
| Sun | Can yellow over time | Color-stable |
| Build | Thick; fills small flaws | Thinner per coat |
| Working time | Forgiving | Short |
The most common Georgetown garage system is a hybrid: an epoxy base for bonding and build, a flake broadcast, and a polyaspartic topcoat for sun resistance and faster cure. Many Georgetown garages face west or have doors that stay open during yard work, which makes color stability worth paying attention to.
Choosing a Color for a Georgetown Garage
Color choice is personal, but some practical points help.
- Limestone dust and caliche. Many Georgetown properties have pale dust from limestone and caliche. Light-tan and gray blends hide it well.
- Dark clay soil. On the east side, dark prairie soil tracks in on tires. Mid-tone and darker blends hide it better.
- Brightness. Light floors reflect more light, helping visibility in garages with few windows, which many older residents appreciate.
- Heat. Very dark floors in direct sun get warmer.
- Matching the house. Some owners pick a blend that echoes their brick, stone or trim.
Always look at physical samples on your own floor, in your own light.
Floors for Different Georgetown Homes
Active-adult communities
Owners in active-adult communities often prioritize safety and easy care. A textured flake or quartz system with a slip-resistant topcoat, in a light blend that makes the floor easy to see, is a common choice. Golf-cart bays are coated with the garage.
Family homes in newer subdivisions
Two- and three-car garages that hold cars, bikes, sports gear and storage. Full-broadcast flake in a forgiving mid-tone blend handles daily life well.
Larger homes and hobby garages
Oversized garages often double as workshops, gyms or entertaining spaces. Some owners choose a metallic or decorative finish for part of the space and flake for the parking area.
Historic homes near downtown
Older detached garages and carriage houses may have thin, uneven or painted slabs. Preparation and patching matter more than the finish choice here.
Comparing Finishes Side by Side
| Finish | Texture | Hides dirt | Slip resistance | Sun resistance (with polyaspartic top) | Relative cost |
|---|---|---|---|---|---|
| Full flake | Light | Very well | Good | Good | Mid |
| Partial flake | Smooth | Moderately | Fair | Good | Lower-mid |
| Quartz | Sandy | Well | Very good | Good | Mid to higher |
| Metallic | Glossy, smooth | Poorly | Fair without additive | Good | Higher |
| Solid color | Smooth | Poorly | Fair without additive | Good | Lower |
This table is a general guide. Your floor's condition and how you use it may change the recommendation.
Which System for Which Space
- Everyday two-car garage: full flake, mid-tone blend, polyaspartic topcoat.
- Golf-cart bay: full flake or quartz with a durable topcoat.
- Workshop: solid color or partial flake so small parts are easy to find, with a chemical-resistant topcoat.
- Home gym: full flake around rubber mats.
- Laundry or mudroom: quartz for grip and easy washing.
- Game room or studio: metallic or solid color.
- Covered patio: quartz or flake with a UV-stable topcoat and slip-resistant additive.
- Restaurant kitchen: quartz with coved edges.
- Retail or office: metallic or solid color.
Why We Don't Rank Ourselves
Comparison pages like this one usually end with the author's own company at the top. We'd rather give you the information to judge for yourself. Use this guide to decide which system you want, then compare installers on preparation, the written scope and how clearly they explain the plan for your floor.
Patios, Porches and Outdoor Concrete
Georgetown's long outdoor season means many people ask about coating patios and porches. Outdoor surfaces face direct sun, rain and temperature swings, so:
- UV stability matters more. Polyaspartic topcoats are generally preferred.
- Slip resistance matters more. Quartz or an additive in the topcoat helps when the surface is wet.
- Drainage matters. Water should run off the slab, not pool on it.
- Not every slab is suitable. Some outdoor slabs have moisture or movement problems that make coating unwise. We'll say so if that's the case.
Commercial Floors in Georgetown
Commercial spaces range from shops and restaurants around the square to medical offices along Williams Drive and light industrial units near I-35.
- Restaurants and kitchens: quartz systems with coved edges and attention to drains.
- Retail and offices: metallic or solid-color finishes that look clean and are easy to maintain.
- Clinics and salons: easy-clean, low-odor installation scheduled outside opening hours.
- Warehouses and shops: durable systems with joint treatment and phased work.
- Electronics or server rooms: static-control flooring when required.
The published commercial range is $2–$5 per square foot, depending on system and schedule.
Georgetown Businesses and Downtown Buildings
The historic buildings around the courthouse square bring particular challenges. Older concrete may be uneven, patched or covered by layers of earlier flooring. Some floors have been exposed and want a decorative finish that suits the building's character, such as a solid color or a subtle metallic. Work usually has to fit around opening hours, which can mean overnight or weekend installation. Because we are open 24 hours, 7 days a week, it's easy to plan those windows with us. For any downtown commercial floor, share photos, a rough floor plan and your opening hours first.
How Ground Conditions Affect the Choice
West side (limestone): Slabs tend to move less, but may sit on uneven rock. Cracks are often narrower and more stable. Standard crack repair before coating is usually enough.
East side (clay): Slabs move more with wet and dry cycles. Cracks can be wider and may open further over time. A coating can't stop soil movement, so we discuss what to expect and repair cracks carefully before coating.
Everywhere: Moisture can rise through slabs without a good vapor barrier. Where we see signs of it, testing and a moisture-tolerant primer are part of the estimate.
Common Floor Problems in Georgetown Garages
Builder sealers and smooth slabs
Many newer Georgetown homes come with a clear sealer on the garage floor, applied by the builder. It looks fine at first but wears unevenly and blocks a new coating from bonding. It has to be ground off. New slabs are also often hard-troweled very smooth, which needs thorough grinding to open the surface.
Peeling DIY coatings
Store-bought kits rolled over cleaned or etched concrete often peel where tires sit, especially after a hot summer. Whatever is left must be removed before a professional system goes down.
Cracks near the garage door
The slab edge at the door is exposed to water, sun and the weight of every car that crosses it. Cracks and spalls there are common. They're repaired before coating, and the threshold strip is often treated as its own line item.
White powder and damp patches
Efflorescence, a white mineral residue, and dark damp areas point to moisture moving up through the concrete. Testing comes before any coating recommendation.
Fertilizer and pool-chemical stains
Garages often store lawn and pool chemicals. Spills can etch or stain concrete and may need extra grinding.
Questions to Ask Any Georgetown Installer
- Will you remove the builder sealer, and how?
- How will you handle the cracks I can see?
- Which topcoat do you recommend for a west-facing door?
- How do you make the floor less slippery?
- Will you work within my HOA's contractor hours?
- When can I walk on the floor, and when can I park on it?
- What does the written estimate exclude?
What Installation Day Looks Like
Most Georgetown garages are installed in a single day. The crew protects walls and doorways, diamond-grinds the floor and edges with vacuum dust collection, repairs cracks and spalls, applies the base coat and broadcast, scrapes and vacuums, and applies the topcoat. At the end we walk the floor with you and explain cure times. Grinding is loud for a few hours, so a quick word with neighbors helps in close-set streets.
Planning Around the Seasons
Spring and fall are the most comfortable seasons for coating work in Georgetown. Summer jobs start early in the morning, before garages heat up. Winter cold fronts can slow curing, and we'll move dates if the forecast makes conditions poor. If you have a deadline, such as visiting family, a sale or a move, contact us a few weeks ahead.
After the Floor Is Done
A new floor is a good moment to rethink the garage. Many owners add wall-mounted shelving or slatwall to keep items off the floor, which makes sweeping easier and protects the finish. Felt pads under heavy cabinets and a mat under the workbench help too. If you plan to install heavy storage racks, tell us beforehand; some owners prefer to mount them after the floor has fully cured.
What a Georgetown Estimate Includes
- Measured area.
- Existing condition: stains, cracks, old coatings, moisture.
- Diamond grinding of floor and edges.
- Crack and spall repair.
- Base coat, broadcast and topcoat, each named.
- Options priced separately: stem walls, steps, slip-resistant additive.
- Exclusions.
- Schedule and cure times.
- Total price.
Budgeting for a Georgetown Floor
Start with the published range for your garage size, then adjust. Expect to be toward the lower end with a clean, bare slab, a standard flake blend and no add-ons. Expect to be toward the upper end if a builder sealer or old coating has to be ground off, there are many cracks to repair, or you add stem walls, steps or an extra topcoat. Metallic floors are priced per square foot and cost more because of the hand work involved.
Care and Maintenance
- Sweep or dust-mop weekly; limestone dust is abrasive over time.
- Clean oil, fertilizer and pool-chemical spills promptly.
- Wash with a mild cleaner and water.
- Avoid harsh solvents unless we've confirmed the system can handle them.
- Use mats under tires during wet weather.
How to Get Started
- Call or text (512) 325-5434. We're open 24 hours, 7 days a week, and respond the same day.
- Send photos and tell us your neighborhood.
- Book a site visit.
- Review the written estimate.
- Choose your finish and dates.
Customer Feedback
Austin Epoxy Flooring Pro has a 5.0 rating on Google. If we've coated your Georgetown floor, a short review naming the finish you chose helps neighbors decide.
Request a Free Estimate
Call or text (512) 325-5434 (open 24 hours, 7 days a week) or use the free estimate form. Send the approximate square footage, how the space is used, photos of the current concrete, and your timing.
Frequently Asked Questions
What is the most popular garage floor finish in Georgetown?
Full-broadcast flake with a clear polyaspartic topcoat is the most common choice for Georgetown garages.
What does a two-car garage cost in Georgetown?
Our published range is $1,400–$2,200, with the exact price set in a written estimate.
Which finish is least slippery?
Quartz and full-broadcast flake add texture, and a slip-resistant additive can go into the topcoat.
Can you coat my patio?
Often, yes, with a UV-stable topcoat and added slip resistance. Some outdoor slabs aren't suitable, and we'll tell you if yours isn't.
Does the side of town I live on matter?
It can. West-side limestone and east-side clay affect how slabs move and crack, which shapes preparation.
Do you have a Georgetown office?
No. Our office is in Austin, and Georgetown is part of our regular service area.
When can I call?
Any time. We're open 24 hours, 7 days a week.
Do you coat commercial floors in Georgetown?
Yes, including restaurants, shops, offices, clinics and warehouses.