Home / Locations

Epoxy Flooring in Pflugerville, TX: Coating a Garage Around Storage and Organization

For Pflugerville, TX families: planning a garage floor coating together with cabinets, shelving, overhead storage and slatwall, including what to install first, emptying a full garage, and keeping it organized.

Pflugerville, in Travis County just northeast of Austin, is full of family homes with 2-car and 3-car garages that do a lot more than hold cars. Bikes, strollers, sports gear, holiday decorations, tools, a second fridge and years of boxes all end up there. Many homeowners decide to coat the floor at the same time they finally organize the garage with cabinets, shelving or overhead racks. Doing both together works well, but the order matters. This guide explains how to plan a coated floor alongside a garage storage project. It's written by Austin Epoxy Flooring Pro, with a 5.0 rating on Google, reachable 24 hours, 7 days a week at (512) 325-5434.

A note on our service area: we serve Austin and Georgetown, and our office is at 2025 Guadalupe St, Austin, TX 78705. We don't have an office in Pflugerville, and Pflugerville is outside our usual service area. If you're in Pflugerville and want to talk about a project, call and we'll tell you honestly whether we can take it on. The advice below applies wherever your floor is.

Why Coat and Organize at the Same Time

The garage is already empty. Emptying a full garage is the hardest part of a coating project. If you're reorganizing anyway, you only do it once.
The floor shows. Once storage is off the floor, a clean, coated surface makes the whole garage look finished.
Cleaning gets easier. With items on walls and shelves and a sealed floor, sweeping and mopping take minutes.
Spills stay on the surface. Paint cans, pool chemicals, fertilizer and oil stay wipeable instead of staining.

What Goes In First: Floor or Storage?

The general rule: coat the floor first, then install storage that sits on the floor.

Storage type	Usually installed	Why
Floor-standing cabinets	After coating	Floor runs continuously under them; no outlines to work around
Freestanding shelving	After coating	Easy to move; set on pads
Overhead ceiling racks	Before or after	Doesn't touch the floor; if before, protect the floor during install if done after
Slatwall and pegboard	Before coating	Wall work creates dust and drops screws; do it before the floor
Wall-mounted cabinets	Before coating	Same reason as slatwall
Workbench	After coating	Usually floor-standing
Second fridge or freezer	After coating, after cure	Heavy; set on pads

If wall storage has to go in after the coating, lay down protection on the floor and keep ladders padded.

Emptying a Full Garage

This is where most of the effort goes. A plan:

Sort first: keep, donate, recycle, trash. Many families find a quarter or more of what's in the garage can go.
Book a donation pickup or dumpster for the week before.
Stage what you're keeping in the driveway under tarps, a portable storage container, a spare room or a neighbor's garage.
Plan for vehicles to park outside for a day or two.
Move the second fridge and plug it in somewhere temporary.
Clear everything, including items on low shelves near the floor.

A portable storage container in the driveway for a few days can be worth it for a packed 3-car garage. Check HOA rules first.

Measuring for Storage After Coating

Plan your storage layout before coating so you know where heavy items will sit:

Cabinet runs along side walls.
A workbench under good lighting.
A bike wall near the door.
Sports gear bins near the house door for kids.
A recycling and trash station near the garage door.

Knowing where heavy items go helps you put pads in the right places and keep traffic lanes clear for cars.

Protecting a Coated Floor From Storage

Use feet or pads on cabinet bases and shelving.
Level cabinets with adjustable feet rather than shims hammered under them.
Put drip trays under the second fridge and freezer.
Store chemicals on shelves, not the floor.
Use bins with smooth bottoms that won't scratch when slid.
Don't drag heavy cabinets into place; lift or use furniture sliders.

Choosing a Floor Finish for a Family Garage

Full flake in a mid-tone blend hides dirt from kids, bikes and sports gear.
Texture near the door adds grip on rainy days.
A UV-stable topcoat keeps the front of the floor clear if the door stays open while kids play.
Light colors brighten the space and pair well with white or gray cabinets.

Pflugerville Garage Conditions

Most Pflugerville homes were built in the last few decades on clay soils. Common floor conditions:

Shrinkage and settlement cracks that need filling.
Oil stains where cars have parked for years.
Builder sealers or curing compounds that need grinding off.
Tire marks and rust stains from storage.

These are routine and handled during preparation.

Timeline for a Combined Project

Week before: sort and declutter.
Day before: empty the garage completely.
Day 1: floor coating, usually one day for a 2-car garage.
Day 2: light foot traffic; vehicles often allowed with polyaspartic.
Days 2–7: install cabinets and shelving once the floor is ready for heavier items, following cure guidance.
After full cure: move heavy items, fridge and workbench into place.

Keeping It Organized

Assign zones so everything has a home.
Label bins.
Keep the floor clear of loose items.
Do a quick sweep each weekend.
Review the garage twice a year before items creep back onto the floor.

An Illustrative Example

The following is an illustrative example, not a real job. Picture a 2-car garage in a Pflugerville subdivision, about 420 square feet, packed with bikes, boxes and sports gear, with a second fridge and oil stains on one side. The family plans new cabinets along one wall and overhead racks. A plan: declutter, install overhead racks and wall-mounted items first, empty the garage, coat the floor with a full-flake system and UV-stable topcoat, then set floor cabinets on pads after cure. The coating would likely fall in the 2-car range of $1,400–$2,200, depending on oil removal and repairs.

Overhead Storage and the Floor

Ceiling-mounted racks are popular because they use space that's otherwise empty. A few planning notes:

Install before coating if you can. Ladders, drills and falling debris are easier to manage on bare concrete.
If after coating, pad ladder feet and lay down cardboard or drop cloths.
Keep racks clear of the garage door track and opener.
Store light, seasonal items overhead, heavy items on lower shelves.

Slatwall, Pegboard and Wall Panels

Wall systems keep tools, bikes and sports gear off the floor. Installing them before coating is usually easier: drilling drops dust and screws, and wall panels may need to sit a little above the floor. Leave a small gap at the bottom of wall panels so the coating can run cleanly to the wall and up the stem wall if you're coating it.

Bike Storage

Families in Pflugerville often own several bikes. Options:

Wall hooks for vertical storage.
Ceiling hoists for bikes ridden less often.
Floor stands near the door for kids' bikes, on a mat to catch dirt and protect the floor from kickstands.

Kickstands and pedals can scratch coatings if bikes tip over; a rubber mat under a bike area helps.

Sports Gear and Kids

Sports gear brings mud, cleats, balls and water bottles. A bin or locker zone near the house door keeps it contained. Cleats can scratch coatings; ask kids to take them off outside or on a mat. A full-flake finish hides the scuffs that happen anyway.

Second Fridges and Freezers

Many garages hold an extra fridge or chest freezer. Before coating:

Empty or relocate it with an extension cord to a temporary spot.
Wait until the floor is ready for heavy items before moving it back.
Set it on a drip tray or mat to catch condensation and protect the floor.
Leave space behind it for air circulation.

Lawn and Garden Supplies

Fertilizer, weed killer, pool chemicals and gas cans can stain or damage floors. Store them on shelves or in cabinets, in trays that catch leaks, and clean spills promptly. Lawn mowers should sit on a mat if they drip oil or gas.

Holiday Decorations

Holiday bins are often the bulkiest items. Overhead racks or high shelves are ideal. If bins sit on the floor, choose ones with smooth, flat bottoms that won't scratch when slid.

Working With a Garage Organization Company

If you're hiring a separate company for cabinets or racks, coordinate dates:

Share the coating date with the organization company.
Agree on what they install before (walls, overhead) and after (floor cabinets).
Confirm cure times so they don't load the floor too soon.
Ask them to pad ladders and tools if they work after the coating.

HOA Considerations

Many Pflugerville subdivisions have HOAs. Check rules on portable storage containers, dumpsters, contractor parking and work hours before scheduling. Some HOAs limit how long a storage container can sit in a driveway.

Garage Door and Weatherstripping

A new garage door seal keeps out water, leaves and pests. If your bottom seal is worn, replace it after coating so it sits on the finished floor. Check that the door closes evenly against the new surface.

Questions to Ask Before You Hire

How long until I can install floor cabinets?
When can heavy items like a fridge go back?
Can you coat the stem walls before cabinets go in?
What finish hides dirt from kids and bikes?
How do you handle oil stains?

A Weekend Declutter Plan

Decluttering is the step most families dread. Breaking it into a weekend helps:

Saturday morning. Pull everything out onto the driveway in rough groups: tools, sports, holiday, lawn and garden, car care, household overflow and "not sure." Seeing it all at once makes decisions easier.

Saturday afternoon. Decide on each group. Keep what you've used in the last year or truly need. Set aside donations, items to sell and trash. Kids can sort their own sports gear and outgrown toys.

Sunday morning. Haul donations and trash. Many donation centers accept household goods, and some offer pickups if you book ahead.

Sunday afternoon. Stage the keep pile where it will stay during the coating: under tarps, in a storage container or in a spare room. Label bins by the zone they'll go to after the floor is done.

Planning Zones Before the Floor

Sketch the garage on paper and mark zones before coating:

Parking lanes for each car, with room to open doors.
Entry zone by the house door for shoes, backpacks and sports bags.
Tool and workbench zone with good light.
Lawn and garden zone near the garage door.
Long-term storage overhead or in the back corner.
Recycling and trash near the door for easy curb runs.

Zones keep items off the parking lanes, which is where tires wear the coating most. Keeping the lanes clear also makes weekly sweeping quick.

Garage Floor Mats vs. Coating

Some families consider roll-out garage mats instead of a coating. Mats are fast to install and removable, but they trap water and grit underneath, can shift and curl, and don't stop concrete from staining underneath. A coating bonds to the floor and seals it. Some homeowners use both: a coated floor with a small mat under the car that drips most.

Keeping the Garage Cool

Pflugerville summers make garages hot. A coating won't change the temperature much, but a light-colored floor reflects light and makes the space feel brighter. Insulating the garage door, adding a vent fan or a small mini-split can make the garage usable for hobbies year-round; do that work before coating if it involves ladders and drilling.

Making It a Family Project

Getting everyone involved makes the garage easier to keep organized afterward. Give each family member a zone or a bin to sort, let kids pick where their bikes and sports gear will live, and agree on simple rules: shoes and cleats in the entry bin, bikes on their hooks, nothing left in the parking lanes. A label maker and a few clear bins go a long way. When the new floor is done and the storage is up, a quick family walkthrough of where everything goes helps the system stick. A ten-minute reset every weekend, when someone sweeps the floor and puts strays back in their zones, keeps the garage from drifting back to where it started.

Seasonal Garage Resets

Twice a year, in spring and fall, take an hour to reset the garage. Pull out anything that has crept onto the floor, rinse and mop the coating, check for chips near the door and under the fridge, and rotate seasonal bins between overhead racks and lower shelves. Spring is a good time to bring down pool and lawn gear; fall is when holiday bins move within reach and summer toys go up. These quick resets keep the floor clear and the storage system working.

Lighting the Organized Garage

Good lighting makes an organized garage easier to use. Add bright LED fixtures over the workbench and parking lanes before the floor goes down, so electricians aren't on ladders over a fresh coating. Motion-sensor lights by the house door are handy when your hands are full.

Prices

Our homepage ranges: 1-car garages $800–$1,200, 2-car garages $1,400–$2,200, 3-car garages $2,000–$3,200. Polyaspartic systems $3–$7 per square foot, metallic epoxy $6–$12 per square foot and commercial floors $2–$5 per square foot. Repairs, coating removal and special conditions are listed separately in a written estimate.

Contact

Austin Epoxy Flooring Pro serves Austin and Georgetown, with an office at 2025 Guadalupe St, Austin, TX 78705. We don't have an office in Pflugerville. 5.0 rating on Google. Open 24 hours, 7 days a week, with same-day response: (512) 325-5434 or austinepoxypro@gmail.com.

Request a Free Estimate

Call or text (512) 325-5434 (open 24 hours, 7 days a week) or use the free estimate form. Send the approximate square footage, how the space is used, photos of the current concrete, and your timing.

Frequently Asked Questions

Do you have an office in Pflugerville?

No. We serve Austin and Georgetown from our office at 2025 Guadalupe St, Austin. Call (512) 325-5434 to ask whether we can take on a Pflugerville project.

Should I coat the floor before installing cabinets?

Usually, yes, for floor-standing cabinets. Wall-mounted storage and slatwall are often installed before coating.

How long before I can put cabinets on the new floor?

Light items soon after cure; heavy cabinets and fridges after the time your installer recommends.

Where do I put everything during the coating?

Many families use the driveway under tarps, a portable storage container, a spare room or a neighbor's garage.

What finish suits a family garage?

A mid-tone full flake with a UV-stable topcoat hides dirt and handles bikes and sports gear.

Do cabinets damage coated floors?

Not if you use feet or pads and avoid dragging them into place.